Transparent ABS Plastic (MABS CT2010) for Injection Molding
MABS CT2010 is a transparent, high-flow modified ABS pellet grade for injection-molded parts that require clear appearance, reliable flow and balanced impact performance. It is suitable for manufacturers evaluating transparent ABS plastic for electrical housings, automotive components, furniture parts and packaging applications.Request the current technical data sheet and discuss your application requirements with our team.
Transparent ABS Plastic: Key Benefits
- Transparent appearance with typical light transmittance of 91%
- High-flow processing behavior for injection molding
- Balanced mechanical performance, including typical tensile strength of 50 MPa
- Typical Vicat softening temperature of 93.7°C
- Transparent pellet form for consistent material handling
- Suitable for parts where appearance, processability and everyday impact performance need to be considered together
Typical Technical Data
The values below are typical reported data, not product specifications or guaranteed values. Please confirm the current lot data sheet before production approval.
| Property | Typical value | Unit |
|---|---|---|
| Density at 23°C | 1.06 | g/cm³ |
| Mold shrinkage | 0.4–0.7 | % |
| Notched Charpy impact strength | 9.7 | kJ/m² |
| Tensile strength | 50 | MPa |
| Flexural strength | 70 | MPa |
| Flexural modulus | 2063 | MPa |
| Vicat softening temperature | 93.7 | °C |
| Surface resistivity | 6.19 × 10¹⁴ | ohms |
| Volume resistivity at 23°C | 1.64 × 10¹⁴ | ohms·cm |
| Flammability rating | HB at 1.5 mm | UL 94 |
| Yellowness index | 2 | — |
| Light transmittance | 91 | % |
Applications for MABS CT2010
MABS CT2010 may be considered for injection-molded components such as:
- Transparent or appearance-sensitive electrical components and meter housings
- Automotive interior or non-structural parts
- Furniture components
- General packaging and container components
- Medical packaging or container applications where the final product design, regulatory requirements and validation have been independently confirmed
Application suitability depends on part design, molding conditions, local regulations and end-use requirements.
Processing Method
MABS CT2010 is supplied in pellet form for injection molding. Before production, confirm drying conditions, melt temperature, mold temperature, color requirements and the applicable lot data sheet with your processing team.
Why Specify Transparent ABS Plastic by Grade?
For molded parts, “transparent ABS” alone may not provide enough information for material selection. A grade-level review helps engineers compare flow behavior, appearance, shrinkage and mechanical data against the part requirement.When evaluating MABS CT2010, share the following information for a more relevant discussion:
- Part drawing or application description
- Required transparency or appearance standard
- Processing method and machine type
- Target market and applicable compliance requirements
- Expected annual volume and packaging preference
Frequently Asked Questions
What is MABS CT2010?
MABS CT2010 is a transparent, high-flow modified ABS pellet grade intended for injection molding. Its reported typical data includes 91% light transmittance, 50 MPa tensile strength and a 93.7°C Vicat softening temperature.
Is MABS CT2010 a clear ABS material?
It is described as a transparent modified ABS grade. Actual clarity and finished-part appearance depend on part thickness, mold surface, colorants, molding conditions and the current production lot.
Can MABS CT2010 be used for medical packaging?
It may be evaluated for medical packaging or container applications, but this page does not claim medical-grade, food-contact or regulatory approval. Confirm the applicable requirements and current documentation before use.
Is this material suitable for injection molding?
Yes. MABS CT2010 is presented as a pellet-grade material for injection molding. Processing conditions should be validated for the specific part and equipment.
How can I request a technical data sheet?
Contact us with your application, target market and processing requirements to request current product documentation and discuss material suitability.
Continue browsing
More products from the catalog
Pair it with other pieces from the same collection or routine.
Transparent MABS Resin PA-758 | Injection Molding Pellets
Transparent MABS resin PA-758 pellets for injection molding. Typical MFR 3 g/10 min, density 1.08 g/cm³ and balanced impact performance. Request current TDS.
View productABS Resin
LG Chem TR-558AI Transparent ABS Resin — High-Stiffness Extrusion Grade Pellets
LG Chem TR-558AI high-stiffness transparent ABS (MABS) pellets. MFR 2.2 extrusion grade, 90% transmittance, high impact for sheets & fridge liners.
