PET Resin TS8301 — Water Bottle Grade PET Chips
PET Resin TS8301 is a water-bottle-grade polyethylene terephthalate (PET) chip grade. Based on the supplied analysis certificate, this material recorded an intrinsic viscosity of 0.805 dL/g, moisture content of 0.09%, and density of 1.394 g/cm³.For buyers sourcing PET chips for water-bottle-related projects, TS8301 provides a clearly documented set of batch-level technical values. Please confirm processing suitability, current lot data, and destination-market requirements before ordering.
Key Product Features
- Water bottle grade PET chips
- Reported intrinsic viscosity: 0.805 dL/g
- Reported moisture content: 0.09%
- Reported acetaldehyde content: 0.86 µg/g
- Reported density: 1.394 g/cm³
- No off-colour pellets reported on the supplied certificate
- Certificate-reported data for sample TS8301
Certificate-Reported Technical Data
| Property | Reported Result | Unit |
|---|---|---|
| Intrinsic Viscosity (3:2) | 0.805 | dL/g |
| Melting Point | 243.82 | °C |
| Carboxyl End Groups | 22.28 | mol/t |
| Colour Value, L | 84.42 | — |
| Colour Value, b | -2.68 | — |
| Moisture | 0.09 | % |
| Diethylene Glycol | 1.39 | % |
| Acetaldehyde | 0.86 | µg/g |
| Density | 1.394 | g/cm³ |
| Ash | 0.02 | % |
| 100-Chip Weight | 1.61 | g |
| Powder | 0 | — |
| Off-Colour Pellets | None reported | — |
Water Bottle Grade PET Resin for Buyer Evaluation
TS8301 is positioned as a water-bottle-grade PET chip in the supplied certificate. It may be evaluated by packaging-material buyers, converters, distributors, and project teams seeking PET resin with documented intrinsic viscosity, moisture, density, colour, and acetaldehyde results.Use the exact batch certificate when comparing suppliers, as specifications and actual values can vary by production lot.
Request Current COA, Technical Documents and Quotation
Contact Lema Plastic to request:
- Current certificate of analysis
- Technical data sheet and SDS
- Packaging and loading information
- Sample availability
- Current quotation and lead time
- Project-specific sourcing support
Continue browsing
More products from the catalog
Pair it with other pieces from the same collection or routine.
Injection Molding PET Resin WK-821 | High Transparency PET Pellets
PET Resin WK-821 is a high-transparency, high-strength PET pellet grade for injection molding, with 0.83 ± 0.020 dL/g intrinsic viscosity.
View productPET Resin
Medium Viscosity PET Resin YS-W01 | Blow Molding PET Pellets
PET Resin YS-W01 is a medium-viscosity PET pellet grade for blow molding, listed for plastic bottles, PET sheet, and selected packaging applications.
View productPET Resin
Blow Molding PET Resin CR-8863 | Transparent PET Pellets
PET Resin CR-8863 is a transparent PET pellet grade for blow molding and injection molding, with 0.814 dL/g intrinsic viscosity and controlled moisture.
